PAR4CH/PC104 DISK MOUNT SPEC SHEET

Home > Mini ITX & PC104 Systems > PC104 Product Selector > PAR4CH/PC104 DISK

PAR4CH/PC104 Disk Mount

PAR4CH-PC104-DISK Features

   • Outer holes align with PAR4CH
   • Inner holes align with 2.5" hard disk
   • 44 pin 2mm ribbon cable header
   • 40 pin .1 ribbon cable header
   • 26 pin 2mm and .1 ribbon cable headers
   • Price $40
   • Specs Table

Product Description

The PAR4CH-PC104-DISK is one of several accessory boards for use in building a custom PAR4CH/PC104 stack. With its ribbon cable headers and two sets of mounting holes, the disk mount board makes it easy to add a standard 2.5" hard disk into a PAR4CH/PC104 equipment stack.

One set of mounting holes aligns with the PAR4CH and the other mounts a standard 2.5" hard disk. Both 44 pin 2mm and 40 pin .1" ribbon cable headers are provided to allow easy connections with various PC104 CPU cards. An additional connector is included for bringing power to the hard disk when using .1" cables. Plus, the PAR4CH-PC104-DISK has large ground planes for good electrical noise suppression.

Also included on the board is a pair of connected 26 pin ribbon cable headers. One has the 2mm spacing often found on PC104 CPU cards and the other has the standard .1" spacing typically found on floppy drives, providing a handy conversion between the two if needed.

For other accessories see:  PC104 Product Selector, Accessory Product Selector

Specifications Table