|
Home Page >
Data Acquisition >
PAR1CH
| PAR1CH -- click for tour |
 |
PAR1CH A/D Features
• 24 bit resolution
• One analog channel
• Also available in 4CH and
8CH models
• An A/D converter per channel
• Sampling rates from DC to 5 kHz
• 4 digital inputs, 4 digital outputs
• Connects to parallel port on PC
• Application software with source
• Polled digital I/O
• 10us GPS time stamping typical
• Low 90 milliamp current draw
• Price
$220 for bundled "in the box" system
• Spec Table
• PDF Documents & Software
• Options
Download PDF Product Flyer  ,
User Manual
Product Description
The PAR1CH is the 1 channel member of the PARxCH family of 24 bit
realtime continuous data acquisition systems. It offers a low cost
way to begin using 24 bit technology with all the capabilities of the
4 and 8 channel systems.
For the PAR1CH 24 bit A/D, highest resolution occurs at
10-1000 Hz, with maximum sampling rates of 5 kHz sustained. The PAR1CH
analog input is differential with an amplitude range of +/- 10 volts.
The on board 2 Mb DRAM allows continuous no loss data acquisition even
on heavily interrupted and multitasking PCs. The PAR1CH sits outside
the PC for improved noise performance and communicates its acquired
data using the standard PC parallel port.
A full-featured acquisition and display program is included with
the system software, so
you can be up and running immediately; controlling acquisition rates
and continuously saving acquired data to disk. For developing custom
applications, low level functions that control the PAR1CH are
supplied as static, DLL or shared libraries. Full source code is included
and the PDF user manual contains circuit diagrams.
The 2 MB DRAM data buffer acts as a back up to make sure data is
not lost even if the PC is interrupted for long periods on other
tasks. There are no "fall through" times or buffer latencies. As
soon as any data is ready from the PAR1CH, the PC is notified so it
can get the data. Any additional data that comes in while the PC is
getting around to servicing the PAR1CH is simply stored up. With 2 MB
of buffering at 10 Hz sampling, you have more than 4 hours of back
up, with proportionally shorter times at higher frequencies. These
times are more than enough to satisfy typical PC latencies.
The PAR1CH comes with all the accessories you need to start
acquiring data. These include software, manual (PDF), 9 VDC power
supply, 6' parallel port cable, TRM15E 4 channel terminal board, and desktop
enclosure.
Specifications Table
For more detailed specifications, please see the User Manual.
| PAR1CH Specs |
| Channels: |
1 |
|
| Resolution: |
Max: 24 bits, Typical: 23 bits at 10 Hz,
21 at 100 Hz, 19 at 1 kHz |
FAQ note |
| Sample Rate: |
Min: 0.00001 Hz, Max: 5 kHz sustained,
Recommended: 10-3000 Hz |
FAQ note |
| Gain: |
1 to 16, program selectable |
|
| Crosstalk: |
None, there is only one channel |
|
| Analog Input Type: |
Differential |
FAQ note |
| Common Mode Rejection: |
102 dB |
|
| Analog Input Voltage: |
+/-10v, other ranges possible with
AMP4CH-DF amplifier |
FAQ note |
| Analog Input Impedance: |
Approximately 16k ohms |
FAQ note |
| Analog Input Header: |
9 pin D-Shell or plain wire with TRM15E |
|
| Digital Input: |
Polled |
FAQ note |
| Digital I/O: |
4 input and 4 output bits on 15 pin D-Shell |
|
| Digital I/O Levels: |
TTL/CMOS 5 volt |
|
| PC Connection: |
EPP/BPP/ECP PC parallel port |
FAQ note |
| Power Requirements: |
9 to 24 vdc or vac, 9 volts DC preferred, 90ma @+9v |
|
| A/D Converter: |
TI ADS1210 |
|
| A/D Type: |
Sigma Delta |
|
| Data Buffer: |
2 MB DRAM |
|
| Board Dimension: |
3.38" W x 5.00" D |
|
| Enclosure Dimension: |
3.63" W x 5.50" D x 1.63" H |
|
| Supported OS: |
Win2K/XP, Win95/98/ME, DOS, Linux |
|
| ROHS Compliance: |
Compilant by exemption |
FAQ note |
| Price: |
$220 |
|
Documents and Software
These documents represent the complete specs for this product.
They can also be found on our
Downloads page.
| PAR1CH Documents & Software |
| Category |
Description |
Rev |
File |
# bytes |
| HTML |
PARxCH software summary |
|
|
|
| Product Flyer |
PARxCH specs |
2012/01/06 |
flyparxch.pdf |
48,672 |
| User Manual |
PARxCH user manual |
2007/02/01 |
manparxch.pdf |
83,874 |
| User Manual |
PARGPS user manual |
2007/12/09 |
manpargps.pdf |
38,891 |
| System Software |
Windows 2K/XP |
2010/10/05 |
parwin.zip |
8,620,816 |
| System Software |
Linux 2.6.33.3-85.fc13.i686.PAE (Fedora 13) |
2010/10/05 |
parlnx.tar |
6,164,480 |
| System Software |
DOS (no GPS support) |
2010/10/05 |
pardos.zip |
1,493,256 |
Price Table
The following items may be purchased individually or at a discount as a bundled "in the box" system. When purchasing a PAR1CH "in the box" system, the following are included:
| PAR1CH In The Box |
| Item |
Description |
Price |
| BOARD-PAR1CH |
1 channel, 24 bit data acquisition
board connects to PC parallel port |
$155 |
| CASE-PAR1CH |
Vinyl coated steel enclosure with rubber feet |
$32 |
| TRM15E |
15 position terminal board and cable
for connecting analog input |
$35 |
| CABLE-DB25-MF-6 |
Six foot molded DB25 male to female
PC parallel port cable |
$8 |
TRANS-WALL-09V-DC
TRANS-EURO-09V-DC |
9 vdc, 500 ma wall transformer, 110 vac input
(or substitute a 220 vac euro transformer on request) |
$15 |
| ACC-SOLDERCUP-15-9 |
D-shell solder cups for custom connection to digital and analog inputs |
$2 |
| CD-PARXCH |
CD with software and PDF user manual |
$1 |
| |
Individual item subtotal = |
$248 |
| |
"In the box" discount
( box contents photo ) |
- $28 |
| PAR1CH |
Final cash price = |
$220 |
Options
Some users may want to consider these additional options:
| PAR1CH Options |
| Item |
Description |
Price |
| PARGPS |
For time stamping data acquired with the PAR1CH |
$285 |
| TRM15E |
An additional 15 position terminal board for the digital I/O |
$35 |
| SUB-TRANS-EURO-09V-DC |
Substitute a 220 vac Euro style wall transformer |
$0 |
| Third Party Products |
Links to Third-Party products that enhance the PAR1CH |
|
|
