|
Site Map >
Software Index >
Featured Software
| DVM - SER1CH-UA Digital Volt Meter Program |
 |
The SER1CH-UA system software works for all the members of the SER1CH-UA
low power 24 bit serial port family. These include the
SER1CH-UA-BANA,
SER1CH-UA-DSUB,
SER1CH-UA-1in.
This software includes both DVM and CAL. DVM stands for Digital Volt
Meter and is a data acquisition program displaying data as numbers
similar to a Fluke Meter and saving the acquired data to disk files.
CAL is a companion program for calibrating the SER1CH-UA into convenient
units such as inches or degrees that are appropriate for your sensor.
The screen image shows DVM displaying data acquired by the SER1CH-UA
when its input is connected to its reference voltage. The single
channel of data is displayed in two formats. The first display shows
the measured voltage, while the second shows the data calibrated in
units more directly related to the sensor being used. In this case,
the sensor is a rheostat or 10-turn pot, so the display is calibrated
in turns.
See the SER1CH-UA software page
for more details or get your own copy from the
SER1CH-UA section of our download page.
| VIEW - PARxCH Data Playback and Review Program |
 |
The PARxCH system software works for all the members of the PARxCH 24
bit parallel port A/D family. Now you can change between the
PAR1CH,
PAR4CH, and
PAR8CH
without needing to reinstall a driver.
In addition to the usual data acquisition programs like scope and
simp, this software also includes VIEW, a Windows GUI program for
playback and review of existing .out and .dat data files generated by
the provided acquisition programs.
The screen image shows VIEW displaying a .dat file recorded by the
8 channel PAR8CH. In addition to the 8 channels of analog data, the
display also shows 4 channels of digital data and 1 channel with the
GPS pulse-per-second mark.
See the PARxCH software page
for more details or get your own copy from the
PARxCH section of our download page.
|
