Home Page > Cables & Etc > Spec Sheets

Cables and other accessories that work with SR A/Ds.  Click on the photos below for tours.

USBxCH Cables

CABLE-USB4CH-ANALOGIN

USB4CH

Analog input connector for USB4CH A/D. Female DB15 with 4 twisted pairs for noise rejection and a single wire for ground. All terminating in alligator clips for easy connections. Click photo for views.

SER1CH-UA Cables

CABLE-S1UABA-BANANA3
CABLE-S1UABA-ANALOGIN

SER1CH-UA-BANA

Analog input connectors for SER1CH-UA banana jack model. The BANANA3 is a set of banana plugs only (set of 3). The ANALOGIN is a set of 3 cables with banana plugs and alligator clips on 12 inch wires. Click photo for views.

CABLE-S1UADB-ANALOGIN
CABLE-S1UADB-PWRS232

SER1CH-UA-DSUB

Discrete wire cables for SER1CH-UA D-shell model. The ANALOGIN cable connects front DB9 via 12 inch wires to 3 alligator clips for the analog input. The PWRS232 cable connects back DB15 via 9 inch wires to both a 2.1mm jack for power and a female DB9 for the RS232 connection to the PC. Click photo for views.

CABLE-S1UAIN-ANALOGIN
CABLE-S1UAIN-PWRS232

SER1CH-UA-1in

Discrete wire cables for SER1CH-UA narrow 1 inch borehole model. The ANALOGIN cable connects front 6-pin right angle header via 12 inch wires to 3 alligator clips for the analog input. The PWRS232 cable connects back 8-pin right angle header via 6 inch wires to both a 2.1mm jack for power and a female DB9 for the RS232 connection to the PC. Click photo for views.

VREF-399 Cables

CABLE-VREF399-BANANA6
CABLE-VREF399-ANALOGOUT

VREF-399

Analog connectors for the VREF-399. The BANANA6 is a set of 6 banana plugs. The ANALOGOUT is a set of 3 cables with banana plugs and alligator clips on 12 inch wires. Click photo for views.

Molded USB Cables

CABLE-USB-AB-3
CABLE-USB-AB-6

USB Cables

Standard USB type A to B molded cables for connecting peripherals to a PC. 6 foot cable included with every bundled USBxCH purchase. 3 foot cable substituted for free on request. Click photo for views.

Molded D-Shell Cables

CABLE-DB09-MF-6
CABLE-DB25-MF-6

DB Cables

Standard male to female 6 foot long molded 9 and 25 pin D-shell cables. All pins connected straight through for extension and basic connections. Use DB09 with SER1CH-UA and PARGPS. Use DB25 with PARxCH. Click photo for views.

Pomona Test Leads

Pomona Test Leads

Pomona red/black test leads, right angle banana plug to pointed probe.
Use with the SER1CH-UA-BANA A/D or the VREF-399 precision voltage reference. Click photo for views.

Wall Transformers

TRANS-WALL-09V-DC
TRANS-WALL-12V-DC
TRANS-EURO-09V-DC
TRANS-EURO-12V-DC

Wall Transformers

SR products work with 9 and 12 vdc US or Euro unregulated wall transformers.
US transformers take 110 vac input on a flat two prong plug.
Euro transformers take 220 vac input on a round Continental 2 prong plug.
Both provide DC output voltage on a 2.1mm power plug.

One US style transformer is included with each bundled A/D.
A Euro style transformer will be substituted for free on request.
Click photo for views.

Battery Holder 8

Battery Holder 8

Holder for 8 AA batteries with switch and 2.1mm power plug. Can power USB4CH, PARxCH, or SER1CH-UA. Batteries not included. Click photo for views.

Rack Panels

Rack Panel Front View

RACK-PANEL4CH-6 Features

   • Standard 19" wide, 2U high
   • Anodized aluminum
   • Six cutouts
   • Fits USB4CH, PAR4CH, etc
   • Price Call
   • Spec Table

Product Description

RACK-PANEL4CH-6 is a sturdy 19" wide, 2U high panel made of anodized aluminum designed to fit in standard rack mount frames. It has 6 cutouts for attaching units like the USB4CH, PAR4CH, AMP4CH-DF, and PARGPS while still protected in their enclosures.

The photos show front and back views with a PAR4CH data acquisition board above an AMP4CH-DF amplifier and a PARGPS timing module on the right. Other configurations are easily made with only a screwdriver.

Panels with cutouts sized for the PAR1CH and PAR8CH are also available, as are plain RACK-PANELs with no holes or cutouts that allow for custom mountings. For example, the plain rack panel at the bottom of the top photo was customized to hold 3 TRM15E boards.

Specifications Table